[scribus] text not printing

[ZASKE Martin]

Dear list,

I am always using/testing the latest Scribus for smaller projects. At
the moment I run scribus-1.5.4.svn-snapshot-180119-x64.exe on a fully
updated Windows 10 64bit.


I noticed (also with the previous svn) that when exporting to PDF, all
my text does not show. Illustrations, frames etc. get exported all right.

I searched through the bug tracker and did not find this. So I am asking
here: Is there anything I need to know or do?

I have my layers visible and printable. Have used Scribus for years and
believe that "I am doing it right". When I open those files with 1.5.3
and export again to PDF, then all my text does get exported (but some
other details get messed up and need tweaking, like line-styles or colours).

This is maybe only happening when I work on older documents, which have
<SCRIBUSUTF8NEW Version="1.5.3"> near the top. Have not taken time to
test this a lot. But I would like to hear some ideas, whether just to
wait for a new svn or to go back to 1.5.3 entirely, or needing to
activate some new and less-obvious feature?

Thanks,

Martin

___
Scribus Mailing List: ***@lists.scribus.net
Edit your options or unsubscribe:
http://lists.scribus.net/mailman/listinfo/scribus
See also:
http://wiki.scribus.net
http://forums.scribus.net

[Gregory Pittman]

Post by ZASKE Martin
Dear list,
I am always using/testing the latest Scribus for smaller projects. At
the moment I run scribus-1.5.4.svn-snapshot-180119-x64.exe on a fully
updated Windows 10 64bit.
I noticed (also with the previous svn) that when exporting to PDF, all
my text does not show. Illustrations, frames etc. get exported all right.
I searched through the bug tracker and did not find this. So I am asking
here: Is there anything I need to know or do?
I have my layers visible and printable. Have used Scribus for years and
believe that "I am doing it right". When I open those files with 1.5.3
and export again to PDF, then all my text does get exported (but some
other details get messed up and need tweaking, like line-styles or colours).
This is maybe only happening when I work on older documents, which have
<SCRIBUSUTF8NEW Version="1.5.3"> near the top. Have not taken time to
test this a lot. But I would like to hear some ideas, whether just to
wait for a new svn or to go back to 1.5.3 entirely, or needing to
activate some new and less-obvious feature?

Hi Martin,

This sounds like a missing font issue -- make sure that you have
embedded the fonts or a subset, and if that doesn't work, try outlining
the fonts.

Greg


___
Scribus Mailing List: ***@lists.scribus.net
Edit your options or unsubscribe:
http://lists.scribus.net/mailman/listinfo/scribus
See also:
http://wiki.scribus.net
http://forums.scribus.net

[ZASKE Martin]

Post by Gregory Pittman

Post by ZASKE Martin
Dear list,
I am always using/testing the latest Scribus for smaller projects. At
the moment I run scribus-1.5.4.svn-snapshot-180119-x64.exe on a fully
updated Windows 10 64bit.
I noticed (also with the previous svn) that when exporting to PDF, all
my text does not show. Illustrations, frames etc. get exported all right.
I searched through the bug tracker and did not find this. So I am asking
here: Is there anything I need to know or do?
I have my layers visible and printable. Have used Scribus for years and
believe that "I am doing it right". When I open those files with 1.5.3
and export again to PDF, then all my text does get exported (but some
other details get messed up and need tweaking, like line-styles or colours).
This is maybe only happening when I work on older documents, which have
<SCRIBUSUTF8NEW Version="1.5.3"> near the top. Have not taken time to
test this a lot. But I would like to hear some ideas, whether just to
wait for a new svn or to go back to 1.5.3 entirely, or needing to
activate some new and less-obvious feature?

Hi Martin,
This sounds like a missing font issue -- make sure that you have
embedded the fonts or a subset, and if that doesn't work, try outlining
the fonts.
Greg

Dear Greg,

I thank you for your answer and for your reasonable first try for a
diagnosis:

I can see that to you it sounds like a missing font issue. But since we
are working with an "exotic" language, I have gotten used to the habit
(for years now) to always outline all fonts - unless forced by something
to do otherwise.

I can also exclude missing fonts this way:

- I am working on my own computer, so I have the font
- I make the document
- I use the font, see the font on the screen
- I export to PDF, text is missing, illustrations are there
- I open the problematic Scribus-file in version 1.5.3, the text is there
- I export to PDF from 1.5.3 and the text gets exported in black

So I conclude this is not a missing font issue. It somehow occurs only
in the most recent 1.5.4svn. I am willing to file a bug report, but
wanted to hear from this list if it is a known issue or whether I need
to know about a new feature or something.


I know where to find the latest svn-snapshots. Is there a place (or some
filter in the bug management) which is documenting the changes or fixes
for each of those snapshots?


I had imagined something like "there is a new colour setting now; you
can differentiate between colour for editing-work-on-screen and
colour-for-final-export and we set the default for the latter to "white"
so that users would not miss this new feature".

Or maybe Scribus 1.5.4 is getting more "legally aware". So that fonts
without the proper licence, will silently be excluded during any
exporting. But: the font I used for my last documents (when this problem
hit me) was Fira Sans, one of the free-as-in-speech fonts.

So it must be something else. And just to be complete: I open and print
my exports with either Acrobat Reader DC or with Adobe Acrobat DC, not
some fluffy doubtful PDF tool.


thanks,

Martin


___
Scribus Mailing List: ***@lists.scribus.net
Edit your options or unsubscribe:
http://lists.scribus.net/mailman/listinfo/scribus
See also:
http://wiki.scribus.net
http://forums.scribus.net

[Gregory Pittman]

Post by ZASKE Martin

Post by Gregory Pittman

Post by ZASKE Martin
Dear list,
I am always using/testing the latest Scribus for smaller projects. At
the moment I run scribus-1.5.4.svn-snapshot-180119-x64.exe on a fully
updated Windows 10 64bit.
I noticed (also with the previous svn) that when exporting to PDF, all
my text does not show. Illustrations, frames etc. get exported all right.
I searched through the bug tracker and did not find this. So I am asking
here: Is there anything I need to know or do?
I have my layers visible and printable. Have used Scribus for years and
believe that "I am doing it right". When I open those files with 1.5.3
and export again to PDF, then all my text does get exported (but some
other details get messed up and need tweaking, like line-styles or colours).
This is maybe only happening when I work on older documents, which have
<SCRIBUSUTF8NEW Version="1.5.3"> near the top. Have not taken time to
test this a lot. But I would like to hear some ideas, whether just to
wait for a new svn or to go back to 1.5.3 entirely, or needing to
activate some new and less-obvious feature?

Hi Martin,
This sounds like a missing font issue -- make sure that you have
embedded the fonts or a subset, and if that doesn't work, try outlining
the fonts.
Greg

Dear Greg,
I thank you for your answer and for your reasonable first try for a
I can see that to you it sounds like a missing font issue. But since we
are working with an "exotic" language, I have gotten used to the habit
(for years now) to always outline all fonts - unless forced by something
to do otherwise.
- I am working on my own computer, so I have the font
- I make the document
- I use the font, see the font on the screen
- I export to PDF, text is missing, illustrations are there
- I open the problematic Scribus-file in version 1.5.3, the text is there
- I export to PDF from 1.5.3 and the text gets exported in black
So I conclude this is not a missing font issue. It somehow occurs only
in the most recent 1.5.4svn. I am willing to file a bug report, but
wanted to hear from this list if it is a known issue or whether I need
to know about a new feature or something.
I know where to find the latest svn-snapshots. Is there a place (or some
filter in the bug management) which is documenting the changes or fixes
for each of those snapshots?
I had imagined something like "there is a new colour setting now; you
can differentiate between colour for editing-work-on-screen and
colour-for-final-export and we set the default for the latter to "white"
so that users would not miss this new feature".
Or maybe Scribus 1.5.4 is getting more "legally aware". So that fonts
without the proper licence, will silently be excluded during any
exporting. But: the font I used for my last documents (when this problem
hit me) was Fira Sans, one of the free-as-in-speech fonts.
So it must be something else. And just to be complete: I open and print
my exports with either Acrobat Reader DC or with Adobe Acrobat DC, not
some fluffy doubtful PDF tool.

You may need to file a bug report - be sure to upload a PDF. To that
end, you might create a very simple document, just one page, with text
and an image, just to simplify the analysis. If you can you might try
some different fonts to see if there are some that work, some that don't.

One other thing you might try would be to import a page of your PDF as a
vector file into Scribus and see if the font appears there.

Greg

___
Scribus Mailing List: ***@lists.scribus.net
Edit your options or unsubscribe:
http://lists.scribus.net/mailman/listinfo/scribus
See also:
http://wiki.scribus.net
http://forums.scribus.net